Gateway
Fatech Technology
is a leading professional corporation
Fatech
Gateway
The current device is designed to transmit paired-wire analog radio communications on the IP network platform, and it is actually an effective solution for establishing communications between radio network operators and other networks connected to the gateway,which adds more value to existing networks by combining their capabilities. will lead Using this device, managers and commanders can more effectively define, monitor and optimize their network with a lot of information from a central site and then develop it. It is also possible to transfer information between radios with different standards, frequencies and RF interfaces (Bridge of different radio networks with different frequency bands) over long distances. The mentioned radio gateway simultaneously connects to 2 radios and transmits voice, PTT and SQL for each radio in the IP platform, providing the possibility of IP BASE radios.
This product can input 2 different radio channels along with PTT, COR (SQL) signals, etc., RS232 serial with different IPs into the LAN or WAN network. It can also be used for point-to-point or point-to-multipoint communication. One of the special features of this product is the possibility of controlling and communicating with the software or hardware console of the wireless operator or POC. It is very easy to work with the software installed on the consoles. So that the user can easily monitor and control any data or audio signal. Also, the console software can be set to record all events and conversations related to radio channels and the console. Product features: A- Hardware section • Based on IP protocol
• Based on IP protocol • Support for all types of radio lines (all types of radios) • Possibility of serial communication through RS232 port • The possibility of voice recognition (VAD) in the Core section • The possibility of installation on all types of fixed and mobile centers (telecommunication vehicles and shelters) • Has embedded and modular hardware based on ARM microprocessors B- Software section • Viewing the status of conversations and communication lines in the network at the same time • Ability to listen to any current conversation in individual or group mode • The possibility of multiple radio communication • Recording all conversations and the possibility of searching in the archive from any part of the network (if there is a recorder) Electronic specifications: RGW-2CH 32b Arm® Cortex®-M4 MCU+FPU, 225DMIPS, up to 2MB Flash/256+4KB RAM Processor CPU – 2 MB of Flash memory – 4+256 KB of SRAM – External memory: 16 Mbit SDRAM Memory 10/100M Ethernet interface Ethernet Up Link – Voice codec: G.711U – Static IP Functions – Capacity: 2 CH – Features: PTT, SQL, RSSI, SWR, Change Channel, Radio Setting Full Control (If radio supported) – Support: Motorola, Hytera, Icom, Sailor, R&SCH, Tait, DMR… – Analog In/Out: 100~500 mV RMS – 600 Ohm – Digital I/O: Isolated Radio Accessory 12V DC Power
